CR-HN Series Serial Radio Modems

Serial Radio Solution

AUTOMATIONDIRECT’s CR-HN series serial radios are versatile, low cost, 2.4 GHz frequency-hopping spread spectrum wireless data modems. The CR-HN radios are ideal for SCADA applications as remote modems in multipoint configurations and are an extremely costeffective solution for point-to-point installations.

• A DIN-rail mounted Serial Adapter Box resides in the control panel while the NEMA 4X radio module is mounted externally to the control panel to achieve the best line-of-sight link to the other radio antennas in the system.
  
  
• For most purposes, the CR-HN radio module incorporates an integral 6dB antenna, creating a “single piece” modem. The integral 6dB patch antenna provides a line-of-sight range of several miles.
  
  
• For extended distances or in obstructed environments, higher gain and/or directional antennas are available.
  
  
• Up to 16 networks can be grouped together with 63 remotes (slaves) per network.
  
  
• The CR-HN series radios communicate over the air at 460.8 kbps and support both point-to-point and point-to-multipoint networks..
  
  
• 2.4 GHz Frequency Hopping Spread Spectrum Technology - Unique “Frequency Skip” setting to avoid 802.11 Wireless Ethernet LANs
  
  
• The CR-HN series is UL, FCC and CE marked.

Four Models Available:

• CR-HN50 - Hop-Net radio with 50ft cable and integral antenna
  
  
• CR-HN50X - Hop-Net radio with 50ft cable and external antenna connector
  
  
• CR-HN04 - Hop-Net radio with 4ft cable and integral antenna
  
  
• CR-HN04X - Hop-Net radio with 4ft cable and external antenna connector
  
  

CR-HN Series Serial Radio Modems are priced from $559.00

• CR-SEAP - Serial to Ethernet Access Point, enables serial devices on CR-HN radios to appear as nodes on an Ethernet network, 10/100 Base-T, 460Kbps with integral antenna
  
  

The CR-SEAP Serial to Ethernet access point is priced at $1,195.00

CR-HN04