Do you need a cost effective solution to your wire and cable management challenges?

Wire Duct with Cover - T1 Series

The T1 series rugged wiring duct is made of rigid PVC and carries a UL 94V-0 flammability rating for your wire containment needs. Use this wireway to organize and protect wires and cables in your industrial environments.

All our wiring duct comes complete with cover.
Replacement or spare duct covers can be purchased separately. Replacement covers are manufactured from the same rigid self-extinguishing PVC material.

All T1 series wire/ cable ducting comes in 6.56 foot (2 meter) lengths and can be purchased as a single piece, or in cases.
Case sizes vary dependent on the wire duct size with either 4, 6, 8, 12, 16, 18, 20 or 24 pieces per case. This open slot rigid PVC ducting is offered in light gray or white.
Color is denoted in T1 series part numbers by adding a suffix of “G” for light gray; or a suffix of “W” for white.
Packaging is denoted by adding a suffix of “-1” for a single piece package, otherwise a case will be delivered.

Features include:

• Comes with standard mounting holes
  
  
• Wide finger design provides greater rigidity and larger slot width
  
  
• Rounded, burr-free edges will not cut your hands or the wiring insulation
  
  
• Non-slip duct cover is included
  
  
• Flush cover design holds 10 - 12 percent more wires than traditional designs
  
  
• Composed of lead-free material
  
  
• Restricted slot design retains wires in slot for fast, easy wire installation or removal
  
  
• Patented recess boss for rapid mounting of components
  
  
• Two predetermined break lines, one for breaking off and removal of sidewall finger segments only, and another for removal of sidewall finger and base segments

T1 Series Wire Fill Capacity

The base perforation of both the T1 and T1E series wiring duct allows mounting on the panel with rivets R6 or R4, or on DIN rails. The recess bosses in the base permit rapid mounting of wire retainers (CL series), inserts (ZP2), and separators (SEP series) inside the wiring duct.

The duct base perforation is in accordance with DIN 43659 and DIN VDE 0660 TEIL 506 standards.

For information on cross referencing our products with other wire duct products: Wire Duct Cross Reference Document


NOTE: For further details or technical specifications, select the desired product category and select the "Products" tab and click on the desired "Item Code" link, or select the "Technical Info" tab.